Filling and gate location
Compare how proposed gate positions affect flow path, filling balance and possible weld-line locations.
Hogar / Ingeniería / Análisis de Flujo de Moldes
Engineering review
Análisis de Flujo de Moldes
Use simulation to examine filling behavior and discuss tooling options before the mold concept is finalized.
Questions simulation can help frame
A useful report connects each result to a design question. The simulation scope depends on the part geometry, resin and agreed process assumptions.
Packing and pressure
Review where pressure demand or uneven packing may need closer attention in the mold concept.
Cooling and distortion
Examine temperature differences and deformation risks where the model supports that analysis.
Design response
Record whether the findings suggest a change to the part, gate, runner, cooling layout or trial plan.
Interpret the plot in context
Color maps make trends visible, but the interpretation depends on material data, geometría, mesh, boundary conditions and the proposed process window.
The output is a decision aid. Trial results and agreed acceptance criteria still matter.
What to share for review
A defined input package helps distinguish a useful engineering question from a generic simulation request.
Modelo de pieza
Current 3D CAD and 2D drawing revision.
Material
Resin grade or material requirements, including any approved alternatives.
Quality concerns
Superficies críticas, dimensiones, optical or assembly requirements.
Production context
Machine constraints, volumen esperado y cualquier límite de procesamiento conocido.
Preguntas frecuentes
¿Necesita cada molde análisis de flujo??
Alcance del análisis en torno a una decisión o riesgo. Geometría, los requisitos de resina y calidad determinan si es útil.
¿Puede la simulación garantizar el primer resultado de la prueba??
No. El modelo se basa en supuestos. Las muestras de prueba se comprueban según los criterios de aceptación acordados.
