Beleuchtung und optische Teile
Mark transparent regions, light-facing surfaces and assembly datums. Provide optical and cosmetic criteria, including how the finished samples will be reviewed.
Automobilformen
AUTOMOTIVE COMPONENT TOOLING
GPTMOLD entwickelt maßgeschneiderte Spritzgussformen für Automobilanwendungen, mit entsprechender Expertise in optischer Werkzeugentwicklung und Fahrzeugbeleuchtung. A useful project discussion brings the part model, Material, appearance and assembly requirements together. Use the related automotive guidance to prepare your enquiry, then share the requirements for your own component.
The tooling brief should explain where the part sits in the vehicle assembly and which features determine acceptance. Identify the surfaces that will be seen, the dimensions that control fit and the checks required before the next project stage.
Diskutieren Sie Ihr ProjektReview the application and assembly
Visible and functional components
Identify appearance zones, Verbindungsmerkmale, ribs and locating surfaces. Discuss draft, gate positions, parting lines and release direction using the current design.
Multiple materials or colors
Describe the function of each region and the intended interface. Review the molding sequence and assembly needs before selecting a two-shot or overmolding route.
Veröffentlichte Kategorieelemente
Explore the existing records below, then use your current part requirements to discuss the next project.
Was in Ihre Anfrage aufgenommen werden sollte
- Current 3D CAD and 2D drawings, with revisions and critical dimensions clearly identified
- Teilanwendung, mating-component information and assembly requirements
- Zielkunststoffgrad, Farbe, surface finish and cosmetic acceptance limits
- Expected production volume, preferred cavity arrangement and intended molding equipment, where known
- Sample quantities, inspection methods, customer-specific documentation and project timing
Überprüfungs- und Abnahmeplanung
Start with DFM analysis to clarify geometry and tooling questions. Record decisions about wall transitions, Gefälle, gates and other design details before agreeing the mold design. Where filling, venting or cooling questions need further investigation, discuss the appropriate analysis scope. Weiter, define trial objectives and sample acceptance criteria. Review dimensions, fit, appearance and specified functional checks against that brief. Record approved results and any changes needed, then agree the inspection and handover information for the next stage. The mold validation guide provides related planning topics.
